Metal hardline delete kit for barra(also fits sohc). This kit is aimed at conversions where the heater core outlets are 5/8(16mm). The barra hardlines are 3/4(19mm) so it ends up being a mess of adaptors and hoses to step down to the right size. This kit comes with everything needed to run 2 lines from the water pump to the heater and the thermostat housing to the heater with 2 Braided PTFE hose for the turbo coolant, complete with the custom extended turbo fittings. The standard kit will suit stock fg turbo manifold but can be custom made to suit high mount etc. Check the custom size

Comes with the following

2x 5/8 hoses with 90deg ends

2x -10 to barb adaptors

-6 and -10 push in fittings(thermostat and waterpump)

2x Stainless clamp

2x Zinc plated bolts

2x Oring

2x Black braided PTFE turbo coolant hoses with turbo adaptors

1x Bracket for coolant lines


*Special note – these require the barra water pump with threaded hole, some aftermarket early model ones don’t have this*

Additional information

Weight 1 kg
Dimensions 40 × 40 × 10 cm
Hardline kit

NA, Turbo